Oil in Water

OverviewSpecificationsResources

Amperometric type Chlorine Dioxide Analyser

  • Range: 0.05 to 10.00 ppm or 0.05 to 20.00 ppm
  • Automatic temperature compensation by an integrated temperature sensor.
  • No consumables & no reagents are required for analysis.
  • Controller housed in ABS Plastic (Ip65)
  • Built-In relays for alarms.
  • 16X2 Alphanumeric LCD display
Can be used to measure disinfectants in:
  • Potable water
  • Swimming pools
  • Drinking water
  • Process water
  • Service water
Measuring Ranges : 0.05 to 10.00 ppm or 0.05 to 20.00 ppm
Resolution : 0.05
Measuring Principle : Membrane Covered, amperometric 2- electrode system
Sensor working temperature : > 50 to < 450 C
Sample Flow Rate : Approx. 30 L/h
Sample pH range : pH 1 to pH 12
Sample : 0.5 bar
Response Time : 90=Approx. 2 min
Slope Drift : Approx. <1% per month
Sample Temperature compensation : Automatically, by an integrated temperature sensor
Relays : Two potential – free contacts, programmable
Display : 16X2 Alphanumeric LCD display
Slope Calibration : By using pocket colorimeter, DPD-1 Method
Ambient Temperature : 00C to 550C
Relative Humidity : 10-99% at 250C
Power Supply : 230v AC (24v DC optional)
Power Consumption : 10VA
Auxiliary Power Supply : 24v DC @ 30mA
Communication : RS232
Retransmission Output : 4-20mA
Mounting : Wall Mounting
Measuring Transmitter enclosure : ABS Plastic (IP 65)
Dimensions : 130X185X105mm
Process Connection : Sample Inlet : Push Fit 8mm OD
Sample Outlet : Push Fit 8mm OD
Weight : Approx. 5 Kg
Ordering Information :
Waterline 1000 Series :
Cat No. OR-CDA10 Range : 0.05-10 ppm
Cat No. OR-CDA20 Range : 0.05-20 ppm